Welcome to Align RC CDN!

Discounted Items

Various parts Priced to Clear

Items 1 to 30 of 41 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction
  1. 1S1P 3.7V 530mAh/20C HBP05301

    1S1P 3.7V 530mAh/20C HBP05301


    HBP05301

    Regular Price: $26.59

    Special Price: $17.28

    Use for M424 Quadcopter. Instructions: This Li-poly battery is using series/balancing design, features high efficient and high discharge. Max Continuous Discharge: 20C. Normal operating temperature is approx. 40-65°C(within 80% of rated discharge). Max. temperature: 80°C. Recommend to discharge the battery within 80% of rated discharge, keep 95% capacity when over 100 cycles, keep 90% capacity when over 150 cycles.(The cycle life and efficiency will reduce due to high current, high temperature and over-discharge) NOTE: When using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Discharging capacity can't exceed 80% of the max capacity after full charging to ensure a good cycle performance.Recommend to full charge a brand new battery before using and only discharge the battery 50% for first 5 times to make a good efficiency of the battery. Please make it a habit to always count time for flight, or please set a low voltage protection on ESC (Cell voltage after stopping using can not lower than 3.4V). Do not use the battery at insufficient of voltage. Do not expose batteries to sunshine or store/ charge batteries at the temperature up to 35℃ in a airtight car. The environment high temperature could cause the damage or the danger of burst. If the battery becomes hot while high current discharging or flying, please do not charge the battery immediately. Wait to cool down(about 20 mins), then inspect to recharge. If against follow the original factory using rules, possibly cause the battery to inflate or any dangerous accident happens. Do not leave the charger is operating unattended as it may cause a fire. Content: Output:3.4V 530mAh 1.96WH (1S1P) Dimension:46.3x26.8x8.7mm Weight:15g Learn More
  2. 250 Ball Link H25036

    250 Ball Link H25036


    H25036

    Regular Price: $6.64

    Special Price: $5.31

    Use for T-REX 250. Learn More
  3. 250 Metal Flybar Control Set/Black H25006-00

    250 Metal Flybar Control Set/Black H25006-00


    H25006-00

    Regular Price: $13.29

    Special Price: $6.64

    Hexagonal screw hole 1.3mm Flybar control rod x 2(◊›3x27.1mm) Set screw x 2(M2x2mm) Metal flybar control arm x 2 Socket button head screw x 4(0#x3mm) Learn More
  4. 250 Metal Tail Drive Gear Assembly H25079

    250 Metal Tail Drive Gear Assembly H25079


    H25079

    Regular Price: $11.96

    Special Price: $9.30

    Use for T-REX 250 Learn More
  5. 250 Tail Boom Mount H25020

    250 Tail Boom Mount H25020


    H25020

    Regular Price: $7.97

    Special Price: $5.31

    Use for T-REX 250 Learn More
  6. 250SP Brushless Motor(3400KV) RCM-BL250SP

    250SP Brushless Motor(3400KV) RCM-BL250SP


    KX880004

    Regular Price: $39.89

    Special Price: $23.93

    Input voltage:DC7.4-11.1V 2-3cell Li-Po Max continuous current:14A/17A(30sec) Max output power:Approx. 150W/180W(30sec) KV value:3400KV Dimension:spindle 2.5x24.8x22mm Weight:Approx. 30g Accessories: Socket button head screw(M2.5X5mm)X2 plus ALIGN standard 2mm gilt terminal x 3set Learn More
  7. 450 Landing Skid Set

    450 Landing Skid Set


    HS1101

    Regular Price: $7.97

    Special Price: $3.98

    Landing Skid Set Learn More
  8. 500 Metal Main Shaft Bearing Block H50075

    500 Metal Main Shaft Bearing Block H50075


    H50075

    Regular Price: $35.90

    Special Price: $21.55

    500 metal bearing cap x 2 Metal bearing holder x 2 Bearing MR688ZZ x 2(16x5mm) Socket screw x 8(M2x4mm) Socket button head collar screw x 8(M2.5x6mm) Learn More
  9. 500E GF Main Frame/1.6mm H50029

    500E GF Main Frame/1.6mm H50029


    H50029

    Regular Price: $58.51

    Special Price: $39.89

    Fiberglass main frame x 1(1.6mm) Learn More
  10. 500FL Main Rotor Holder Set/Black H50126

    500FL Main Rotor Holder Set/Black H50126


    H50126

    Regular Price: $63.83

    Special Price: $39.89

    Use for T-REX 500 3GX Programmable Flybarless System Learn More
  11. 600 Carbon Fiber Tail Boom/3K HN6097

    600 Carbon Fiber Tail Boom/3K HN6097


    HN6097

    Regular Price: $37.23

    Special Price: $26.59

    Use for T-REX 600/600 Nitro Learn More
  12. 600N Painted Canopy (Fiberglass RED) (replaces HN0009)

    600N Painted Canopy (Fiberglass RED) (replaces HN0009)


    HN6034

    Regular Price: $93.09

    Special Price: $39.89

    600N Painted Canopy (Fiberglass RED) (replaces HN0009) Learn More
  13. 600N Rotorhead Upgrade Assembly HN7074

    600N Rotorhead Upgrade Assembly HN7074


    HN6074

    Regular Price: $74.47

    Special Price: $39.89

    600N Rotorhead Upgrade Assembly Learn More
  14. 700 3G Programmable Flybarless System/Silver

    700 3G Programmable Flybarless System/Silver


    HN7093

    $172.90

    SPECS: Suitable Voltage Range:DC 4.5~8.4V Current Comsumption:<80mA @ 4.8V Flip and Roll rate detection speed: :300degrees/sec Rudder rate detection speed:500degrees/sec Sensor resolution: 12bit Operating temperatur:0~65 Operating humidity:0%~95% RoHS certified Dimension: Control box:42x26.5x14.5mm Sensor:22.3x21.7x14mm Weight: Control box:16g Sensor:9g Accessories: Main Rotor head Set x1 Flybarless control unit x1 Flybarless Sensor x1 Screw bag x1 Linkage rod A x2 Linkage ball A x2 Head Stopper x1 Mixing base assembly x1 Pitch Gauge x1 Sensor mounting foam x2 Signal extension wire 100mm x1 Signal extension wire 220mm x1 F servo horns x3 J servo horns x3 Learn More
  15. 700 F3C Carbon Fiber Blades HD700A

    700 F3C Carbon Fiber Blades HD700A


    HD700A

    $162.25

    ●Use for T-REX 700N / 700E. ●Newly 700E F3C carbon main blades for superior stability and resistant to wind gusts. Learn More
  16. 700 Main Drive Gear/164T HN7019-1

    700 Main Drive Gear/164T HN7019-1


    HN7019-1

    Regular Price: $22.60

    Special Price: $13.29

    Use for T-REX 700 Nitro Pro. Learn More
  17. 700 Metal Flybar Seesaw Holder

    700 Metal Flybar Seesaw Holder


    HN7013

    Regular Price: $37.23

    Special Price: $21.27

    Specifications: Metal flybar seesaw holder x 1 Bearing MR104ZZ x 2(Φ4xΦ10x4mm) Bearing MF105ZZ x 2(Φ5xΦ11.2xΦ10x4mm) M4 collar screw x 2(Φ5xΦ6.5x10mm) Socket button head screw x 2(M3x12mm) Washer x 4(Φ3xΦ4.8x0.3mm) Learn More
  18. 700 Torque Tube Front Drive Gear Set  M1 24T HN7043A

    700 Torque Tube Front Drive Gear Set M1 24T HN7043A


    HN7043A

    Regular Price: $17.28

    Special Price: $9.30

    Torque Tube Front Drive Gear Set Learn More
  19. 700DFC Main Rotor Head Upgrade Set H70089A

    700DFC Main Rotor Head Upgrade Set H70089A


    H70089A

    Regular Price: $97.08

    Special Price: $79.79

    Instruction: Another innovation from Aligns R&D team: 700 DFC flybarless rotor head system. 700DFC flybarless rotor head system utilizes extreme low CG design, effectively reduces resistance during flight, increased flight responsiveness and precision, resulting in superior 3D performance and unimaginable flight speed. 700DFC not only improves on T-Rex700És performance, the lower CG design is also capable of surprisingly fast speed, not to mention the extremely attractive design. Features: Extreme low CG and short main shaft design, dramatically reduces flight resistance, effectively improves T-Rex 700É 3D performance and speed. Two part detachable main blade grips for ease of maintenance and assembly. New style linkage rod design, complete assembly increases linkage rod rigidity, allowing the pitch slider (follower) to be omitted, resulting in a head assembly that is much simplified and rigid. Upgrading to the 700DFC rotor head assembly is extremely easy; just replace the head block included in the 700DFC kit, replace the blade grip pitch lever with the new 700DFC lever, connect the 700DFC linkage assembly, and replace the main shaft with 700DFC main shaft. Existing swashplate and newer main rotor grips are kept in the upgrade. The damper rubbers are manufactured utilizing POM material, sleek surface, with superior anti-wear characteristic. Suitable for T-REX 700 flybarless system. Learn More
  20. 700EFL Linkage rod(A) set H70066

    700EFL Linkage rod(A) set H70066


    H70066

    Regular Price: $9.30

    Special Price: $5.39

    Use for T-REX 700E Learn More
  21. 700N Painted Canopy HC7018

    700N Painted Canopy HC7018


    HC7018

    Regular Price: $127.67

    Special Price: $73.15

    Use for T-REX 700 Nitro Pro Learn More
  22. Aileron Lever

    Aileron Lever


    H60026

    Regular Price: $15.95

    Special Price: $9.30

    Aileron Lever Learn More
  23. CCPM Metal Swashplate H60017

    CCPM Metal Swashplate H60017


    H60017

    Regular Price: $55.85

    Special Price: $26.59

    CCPM Metal Swashplate Learn More
  24. D6FJ Metal Servo Horn HSP61014

    D6FJ Metal Servo Horn HSP61014


    HSP61014

    Regular Price: $30.58

    Special Price: $25.99

    ALUMINUM SERVO ARMS FOR JR SERVOS ! Learn More
  25. DS510M Digital Servo HSD51001

    DS510M Digital Servo HSD51001


    HSD51001

    Regular Price: $83.78

    Special Price: $63.83

    High rigidity, shock resistant metal gears. Coreless Motor Design for fast speed, high efficiency, and low power consumption. 10 Bits signal resolution for smooth movements. Fast speed with high torque of 4.6kg/cm. High strength composite alloy gears with durable structure characteristics. Aluminum alloy mid case construction for instantaneous heat dissipation Supports digital & analog control signal. Powerful and precise servo suitable for T-Rex 500 CCPM cyclic use. Learn More
  26. Engine Mount

    Engine Mount


    HN6010-1

    Regular Price: $22.60

    Special Price: $10.63

    Use for T-REX 600 Nitro Learn More
  27. F Servo Horn Set HSP61004

    F Servo Horn Set HSP61004


    HSP61004

    Regular Price: $5.31

    Special Price: $3.98

    Quantity: 3 pcs Learn More
  28. Metal Elevator Lever

    Metal Elevator Lever


    H60025-1

    Regular Price: $27.92

    Special Price: $18.61

    Metal Elevator Lever Metal elevator lever x 1 M4 set screw x 1(M4x4mm) Linkage ball A(M3x4) x 3(◊›4.75x8.68mm) Learn More
  29. Metal Main Rotor Housing H50006

    Metal Main Rotor Housing H50006


    H50006

    Regular Price: $39.89

    Special Price: $23.93

    500 Metal Main Rotor Housing Learn More
  30. Metal Main Rotor Housing H60004

    Metal Main Rotor Housing H60004


    H60004

    Regular Price: $45.21

    Special Price: $21.27

    Metal Main Rotor Housing Learn More

Items 1 to 30 of 41 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction