Batteries / Chargers

Items 1 to 30 of 49 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction
  1. 10S JST-XH Adapter Cable for Modular Balance Board

    10S JST-XH Adapter Cable for Modular Balance Board


    AC-10SMBB

    $3.95

    Connect a Modular Balance Board to your iCharger 1010B+, 3010B or 4010Duo with this adapter cable. Learn More
  2. 1S1P 3.7V 530mAh/20C HBP05301

    1S1P 3.7V 530mAh/20C HBP05301


    HBP05301

    Regular Price: $26.39

    Special Price: $17.15

    Use for M424 Quadcopter. Instructions: This Li-poly battery is using series/balancing design, features high efficient and high discharge. Max Continuous Discharge: 20C. Normal operating temperature is approx. 40-65°C(within 80% of rated discharge). Max. temperature: 80°C. Recommend to discharge the battery within 80% of rated discharge, keep 95% capacity when over 100 cycles, keep 90% capacity when over 150 cycles.(The cycle life and efficiency will reduce due to high current, high temperature and over-discharge) NOTE: When using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Discharging capacity can't exceed 80% of the max capacity after full charging to ensure a good cycle performance.Recommend to full charge a brand new battery before using and only discharge the battery 50% for first 5 times to make a good efficiency of the battery. Please make it a habit to always count time for flight, or please set a low voltage protection on ESC (Cell voltage after stopping using can not lower than 3.4V). Do not use the battery at insufficient of voltage. Do not expose batteries to sunshine or store/ charge batteries at the temperature up to 35℃ in a airtight car. The environment high temperature could cause the damage or the danger of burst. If the battery becomes hot while high current discharging or flying, please do not charge the battery immediately. Wait to cool down(about 20 mins), then inspect to recharge. If against follow the original factory using rules, possibly cause the battery to inflate or any dangerous accident happens. Do not leave the charger is operating unattended as it may cause a fire. Content: Output:3.4V 530mAh 1.96WH (1S1P) Dimension:46.3x26.8x8.7mm Weight:15g Learn More
  3. 2S-6S JST-XH Balance Board

    2S-6S JST-XH Balance Board


    AC-26SBB

    $6.59

    When you just need a simple balance board, this is the perfect option - compact and straightforward, this does exactly what it's supposed to do without any bells and whistles. Learn More
  4. 2S1P 7.4V 2200mAh/30C HBP22002

    2S1P 7.4V 2200mAh/30C HBP22002


    HBP22002

    $29.03

    On Order

    Application of 600 to 800 external BEC power Specifications: Output:7.4V(2S1P)2200mAh Rating:30C continuous,40C burst Dimension:34x105x15mm Weight:107g Learn More
  5. 2S1P 7.4V 2600mAh/20C HBP26003

    2S1P 7.4V 2600mAh/20C HBP26003


    HBP26003

    $34.31

    ●Output:7.4V(2S1P)2600mAh 19.2Wh ●Rating:20C continuous,30C burst ●Dimension:32x105x16mm ●Weight:110g Learn More
  6. 2S1P 7.4V 300mAh/30C

    2S1P 7.4V 300mAh/30C


    HBP03001

    $30.35

    ●Output:7.4V 300mAh 2.22Wh(2S1P) ●Dimension:54x21.5x12mm ●Weight:18g ●Support 5C charging (Charging error could result in battery explosion, fire, and other unexpected danger or property loss. Please always charge batteries with equipment in sight, do not leave charger unattended. Should you need to leave the charging area, please remove the battery and abort charging process.) Learn More
  7. 3 Cell Balance Connector - Align

    3 Cell Balance Connector - Align


    K10219A

    $5.27

    3 Cell Balance Connector - Align Learn More
  8. 3S1P 11.1V 1300mAh/30C

    3S1P 11.1V 1300mAh/30C


    HBP13001

    $22.43

    On Order

    ●Output: 11.1V 1300mAh 14.4Wh(3S1P) ●Support 5C charging. ●Dimension: 74x36.5x21mm ●Weight: 115g ●Using 14AWG wire, thermal resistance: 200°C, max continuous current 50A. Learn More
  9. 3S1P 11.1V 2250mAh/50C HBP22503

    3S1P 11.1V 2250mAh/50C HBP22503


    HBP22503

    $48.83

    ●Output:11.1V 2250mAh 25Wh (3S1P) ●Dimension:106x33x21.8mm ●Weight:173g(Not including connectors) ●Max Continuous Discharge:50C ●Using 14AWG wire,thermal resistance:200°C, max continuous current 70A. ●Support 5C charging (Charging error could result in battery explosion, fire, and other unexpected danger or property loss. Please always charge batteries with equipment in sight, do not leave charger unattended. Should you need to leave the charging area, please remove the battery and abort charging process.) Learn More
  10. 3S1P 11.1V 850mAh/30C HBP85001

    3S1P 11.1V 850mAh/30C HBP85001


    HBP85001

    $19.79

    On Order

    Specifications: Output:11.1V(3S1P)850mAh Rating:30C continuous,40C burst Dimension:55x30x24.5mm Weight:70g Learn More
  11. 4 Cell Balance Connector - Align

    4 Cell Balance Connector - Align


    K10264A

    $5.27

    4 Cell Balance Connector - Align Learn More
  12. 6S JST-XH TO 6S THUNDERPOWER Adapter Cable AC-6JSTP

    6S JST-XH TO 6S THUNDERPOWER Adapter Cable AC-6JSTP


    AC-6JSTP

    $6.59

    Converts a balance lead from ThunderPower to JST-XH Learn More
  13. 6S1P 22.2V 1450mAh/45C HBP14501

    6S1P 22.2V 1450mAh/45C HBP14501


    HBP14501

    $59.39

    On Order

    ●This Li-poly battery is using series/balancing design, features high efficient and high discharge, use a inspection machine to match packs, suitable for TREX 450 6S(450MX Brushless Motor 1800KV). ●Max Continuous Discharge: 45C. Normal operating temperature is approx. 40-65°C(within 80% of rated discharge). Max. temperature: 80°C. ●Recommend to discharge the battery within 80% of rated discharge, keep 95% capacity when over 100 cycles, keep 90% capacity when over 150 cycles.(The cycle life and efficiency will reduce due to high current, high temperature and over-discharge) ●Output:22.2V1450mAh 32.2Wh(6S1P) ●Dimension:115x34x28mm ●Weight:230g NOTE: When using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Discharging capacity can't exceed 80% of the max capacity after full charging to ensure a good cycle performance.Recommend to full charge a brand new battery before using and only discharge the battery 50% for first 5 times to make a good efficiency of the battery. Please make it a habit to always count time for flight, or please set a low voltage protection on ESC (Cell voltage after stopping using can not lower than 3.4V). Do not use the battery at insufficient of voltage. Do not expose batteries to sunshine or store/ charge batteries at the temperature up to 35℃ in a airtight car. The environment high temperature could cause the damage or the danger of burst. If the battery becomes hot while high current discharging or flying, please do not charge the battery immediately. Wait to cool down(about 20 mins), then inspect to recharge. If against follow the original factory using rules, possibly cause the battery to inflate or any dangerous accident happens. Do not leave the charger is operating unattended as it may cause a fire. Learn More
  14. 6S1P 22.2V 1850mAh/50C

    6S1P 22.2V 1850mAh/50C


    HBP18501

    Regular Price: $79.19

    Special Price: $67.31

    ●Output: 22.2V 1850mAh 41.07Wh(6S1P) ●Dimension: 108x34x37mm ●Weight: Approx. 274g ●Max Continuous Discharge: 50C ●Using 14AWG wire, thermal resistance: 200°C, max continuous current 70A. ●Support 5C charging. Learn More
  15. 6S1P 22.2V 3300mAh/50C HBP33003

    6S1P 22.2V 3300mAh/50C HBP33003


    HBP33003

    $130.67

    ●Output:22.2V 3300mAh 73Wh (6S1P) ●Dimension:140x43x45.5mm ●Weight:510g(Not including connectors) ●Max Continuous Discharge:50C ●Using 12AWG wire,thermal resistance:200°C, max continuous current 110A. ●Support 5C charging (Charging error could result in battery explosion, fire, and other unexpected danger or property loss. Please always charge batteries with equipment in sight, DO NOT EVER leave charger unattended. Should you need to leave the charging area, please Disconnect and remove the battery and abort charging process.) Learn More
  16. 6S1P 22.2V 5200mAh/60C HBP52004

    6S1P 22.2V 5200mAh/60C HBP52004


    HBP52004

    Regular Price: $179.51

    Special Price: $152.59

    On Order

    Specification: Output:22.2V 5200mAh 115Wh (6S1P) Dimension:138x61x42mm Weight:810g with factory Deans style connectors Max Continuous Discharge:60C Using 10AWG wire,thermal resistance:200°C, max continuous current 140A. Support 5C charging (Charging error could result in battery explosion, fire, and other unexpected danger or property loss. Please always charge batteries with equipment in sight, do not leave charger unattended. Should you need to leave the charging area, please remove the battery and abort charging process.) Learn More
  17. 6S1P 22.2V 6000mAh/60C HBP60002

    6S1P 22.2V 6000mAh/60C HBP60002


    HBP60002

    Regular Price: $207.23

    Special Price: $186.52

    On Order

    ●Output:22.2V 6000mAh 133.2Wh (6S1P) ●Dimension:168x52x48mm ●Weight:860g ●Max Continuous Discharge:60C ●Using 10AWG wire,thermal resistance:200°C, max continuous current 140A. ●Support 5C charging (Charging error could result in battery explosion, fire, and other unexpected danger or property loss. Please always charge batteries with equipment in sight, do not leave charger unattended. Should you need to leave the charging area, please remove the battery and abort charging process.) Learn More
  18. BALANCE LEAD EXTENSIONS  3S

    BALANCE LEAD EXTENSIONS 3S


    AC-BALXJ3

    $7.91

    On Order

    JST=XH CONNECTORS 3S (4WIRES) 12 INCHES LONG. 2 IN PKG CAN BE PLUGGED TOGETHER TO MAKE 24 IN EXTENSION Wire Type: 22 AWG Silicone Learn More
  19. Balance Lead Extensions 2S

    Balance Lead Extensions 2S


    AC-BALXJ2

    $6.59

    Two 12" balance lead extensions 2S (3 WIRES) Learn More
  20. Balance Lead Extensions 5S

    Balance Lead Extensions 5S


    AC-BALXJ5

    $6.59

    Two 12" balance lead extensions 5S (6 WIRES) Learn More
  21. BALANCE LEAD EXTENSIONS 6S

    BALANCE LEAD EXTENSIONS 6S


    AC-BALXJ6

    $7.91

    JST-XH CONNECTORS 6S (7 WIRES) 12 INCHES LONG TWO IN PKG 22 AWG SILICONE WIRE Learn More
  22. BANANA PLUG BINDING POST

    BANANA PLUG BINDING POST


    AC-BPBP

    $7.91

    Specifications Dimensions: 31mm length, 11mm diameter (each post) Learn More
  23. CH150X Li-Po Charger HEC15002

    CH150X Li-Po Charger HEC15002


    HEC15002

    Regular Price: $30.35

    Special Price: $25.79

    Instructions: 1.Suitable for DC 11V~19V power input . 2.Apply to 2S Li-polymer batteries. 3.Features two output function, it can be charging two batteries in the same time. 4.Balance charging is good to prevent the situation of over-charging or under-charging for a single cell. 5.Auto-detected charge status display. 6.The auto-detected function of low voltage for power storage. 7.Reverse polarity protection and short circuit protection. Note: 1.Do not leave the charger is operating unattended as it may cause a fire. 2.If the battery becomes hot while high current discharging or flying, please do not charge the battery immediately. Wait to cool down(about 20 mins), then inspect to recharge. If against follow the original factory using rules, possibly cause the battery to inflate or any dangerous accident happens. Specification: Input Voltage: DC 11V~19V Output Voltage: 2S DC 7.4V Input current : Recommended 1.5A or more Supported Battery Type: Li-polymer Charging Method: CC/CV Charging Current: 1A Size: 71x49.5x21mm Weight:Approx 42g Content: CH150X Li-po Charger x 1 Power cord x 1 Learn More
  24. EC5 MODULAR CHARGE BOARD AC-MCBE5

    EC5 MODULAR CHARGE BOARD AC-MCBE5


    AC-MCBE5

    $13.19

    QUICK OVERVIEW This EC5 module lets you connect two packs in parallel. Use it alone or as part of a larger modular setup! Requires an XT60 Main Port to Charger Cable AC-XTC Learn More
  25. FMA PL8/PL6 ADAPTER CABLE FOR MODULAR BALANCE BOARD

    FMA PL8/PL6 ADAPTER CABLE FOR MODULAR BALANCE BOARD


    AC-PL8MBB

    $3.29

    Connect a Modular Balance Board to your FMA PowerLab 8 or PowerLab 6 with this adapter cable. Learn More
  26. Gens ace 450mAh 11.1V 25C 3S1P Lipo Battery Pack with JST-SYP plug

    Gens ace 450mAh 11.1V 25C 3S1P Lipo Battery Pack with JST-SYP plug


    GA-B-25C-450-3S1P-JST

    $17.15

    Gens ace 450mAh 11.1V 25C 3S1P Lipo Battery Pack with JST-SYP plug Learn More
  27. ICHARGER 106B+/206B/306B ADAPTER CABLE FOR MODULAR BALANCE BOARD

    ICHARGER 106B+/206B/306B ADAPTER CABLE FOR MODULAR BALANCE BOARD


    AC-6SMBB

    Regular Price: $3.29

    Special Price: $2.63

    QUICK OVERVIEW Connect a Modular Balance Board to your iCharger 106B+, 206B , 306B or 406B with this adapter cable. Learn More
  28. ICHARGER 208B/308DUO ADAPTER CABLE FOR MODULAR BALANCE BOARD

    ICHARGER 208B/308DUO ADAPTER CABLE FOR MODULAR BALANCE BOARD


    AC-8SMBB

    $4.61

    This custom designed cable allows you to connect a Modular Balance Board to your iCharger 208B or 308Duo, making it easy to charge as many batteries in parallel as your setup requires. Specifications Input Connector: 8S JST-XH Output Connector: 8S JST-XH Wire Type: 20 AWG Silicone Length: 12" Learn More
  29. ISDT Q6 LITE

    ISDT Q6 LITE


    Q6 LITE

    $60.71

    The perfect entry-level charger, the Q6 Lite is unbeatable combination of price and quality. Providing up to 200W of charging power with the accuracy and intuitive design common to all the ISDT chargers, the Q6 Lite is small enough to fit in the palm of your hand, but able to charge even 6S LiPos with no issues. With XT60 connections on the input and output, this charger is ideal for field charging! Learn More
  30. JST-XH MODULAR BALANCE BOARD AC-MBBX

    JST-XH MODULAR BALANCE BOARD AC-MBBX


    AC-MBBX

    $15.83

    QUICK OVERVIEW This JST-XH module lets you connect two 2S-8S packs in parallel. Use it alone or as part of a larger modular setup! Requires Balance cable for 306B ICHARGER AC-6SMBB Specifications Balance Input Connectors: JST-XH 2S-8S Balance Output Connector: 9-pin connector with standard JST-XH spacing Board Dimensions: 80x49x34mm Learn More

Items 1 to 30 of 49 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction